# $OpenBSD: smsd.conf.openbsd,v 1.1.1.1 2007/07/18 11:03:34 jasper Exp $

devices = GSM1
#devices = GSM1, GSM2
loglevel = 7

# setuid() to this user:
user = _smsd
# it's possible to setgid too, but default is the set of
# groups from /etc/groups

pidfile = /var/run/smsd/smsd.pid
infofile = /var/run/smsd/smsd.info

#logfile = syslog
logfile = /var/log/smsd/smsd.log

[GSM1]
# A sample USB device with typical broken rtscts, so use
# a send delay to reduce the risk of overruns. Some PC cards
# also break rts/cts. For this one I have set incoming=no
# so it doesn't pull the existing messages off the phone.
device = /dev/cuaU0
incoming = no
rtscts = no
send_delay = 20

[GSM2]
device = /dev/cua00
incoming = yes
#pin = 1111
# pin is normally used only with data cards, not phones