# $FabBSD$
# $OpenBSD: Makefile.bsd-wrapper,v 1.75 2007/11/26 11:12:29 espie Exp $
#
# Build wrapper for Perl 5.8.6
#

# For ``NOMAN''
.include <bsd.own.mk>

# There is no point in building a profiled libperl that is never used.
NOPROFILE=

TARGET_MACHINE_ARCH?=	$(MACHINE_ARCH)
# To build a threaded perl, uncomment this.  Not stable on all platforms...
#THREADED_PERL=true

# Perl builds with -fno-strict-aliasing, we want libperl to do the same
CFLAGS+= -fno-strict-aliasing -fno-delete-null-pointer-checks

# Arguments passed to Configure...
CONFIGURE_ARGS= -dsE -Dfabbsd_distribution=defined
.if defined(THREADED_PERL) && ($(THREADED_PERL) == true)
CONFIGURE_ARGS+= -Dusethreads
CFLAGS+= -pthread
.endif

# Our lndir is hacked; specify a full path to avoid potential conflicts
# with the one installed with X11.
LNDIR=		/usr/bin/lndir

H2PH=		/usr/bin/h2ph

LIB=	perl

SRCS=	perl.c gv.c toke.c perly.c op.c pad.c regcomp.c dump.c util.c mg.c \
	reentr.c hv.c av.c run.c pp_hot.c sv.c pp.c scope.c pp_ctl.c pp_sys.c \
	doop.c doio.c regexec.c utf8.c taint.c deb.c universal.c xsutils.c \
	globals.c perlio.c perlapi.c numeric.c locale.c pp_pack.c pp_sort.c    

CPPFLAGS+= -DPERL_CORE -DPERL_RANDOM_DEVICE=\"/dev/arandom\" -I.

.if defined (INSTALL_STRIP) && ${INSTALL_STRIP} == "-s"
STRIPFLAGS='-s'
.endif

GEN_AFTER= 	config.h cflags makeaperl makedepend makedir \
		myconfig writemain Makefile Policy.sh pod/Makefile \
		x2p/Makefile x2p/cflags

GENERATED=	config.sh ${GEN_AFTER}

${GEN_AFTER}: config.sh

CLEANFILES=	config.sh Policy.sh ${MANALL} ${PSALL} ${MANSRCALL} stamp-mansrc.build

.if !exists(${.OBJDIR}/config.over)
${.OBJDIR}/config.over: ${.CURDIR}/config.over
	${LNDIR} -s -e obj -e obj.${MACHINE_ARCH} -e Makefile.bsd-wrapper -e Makefile.bsd-wrapper1 ${.CURDIR}
.endif

all:	perl.build man.build


man.build: perl.build
	cd ${.CURDIR} && exec ${MAKE} -f Makefile.bsd-wrapper1 $@

beforedepend:	config.sh config.h Makefile makedepend x2p/Makefile writemain
	cd ${.OBJDIR} && exec ${MAKE} depend

perl.build:	perl.lib
	cd ${.OBJDIR} && exec ${MAKE}

config.sh:	${.OBJDIR}/config.over
	cd ${.OBJDIR} && PATH="/bin:/usr/bin:/sbin:/usr/sbin" \
	    exec /bin/sh Configure ${CONFIGURE_ARGS}

Makefile cflags makeaperl makedepend makedir myconfig writemain:	
	cd ${.OBJDIR} && exec /bin/sh $@.SH

Policy.sh:
	cd ${.OBJDIR} && exec /bin/sh Policy_sh.SH

config.h: 
	cd ${.OBJDIR} && exec /bin/sh config_h.SH

pod/Makefile:
	cd ${.OBJDIR}/pod && exec /bin/sh Makefile.SH

x2p/Makefile:
	cd ${.OBJDIR}/x2p && exec /bin/sh Makefile.SH

x2p/cflags:
	cd ${.OBJDIR}/x2p && exec /bin/sh cflags.SH

# Never try to regenerate perly.c or perly.h
perly.c perly.h: perly.y
	-@true

install: install.lib install.perl maninstall
	-mkdir -p ${DESTDIR}/usr/libdata/perl5/site_perl/${MACHINE_ARCH}-fabbsd
	(cd ${DESTDIR}/usr/include; ${H2PH} \
		-d ${DESTDIR}/usr/libdata/perl5/site_perl/${MACHINE_ARCH}-fabbsd \
		`find . -name '*.h'`; \
		pax -rw `find . -type l \! -name '*.h' | sed 's/^..//'` \
		${DESTDIR}/usr/libdata/perl5/site_perl/${MACHINE_ARCH}-fabbsd)
	-chmod -R a+rX ${DESTDIR}/usr/libdata/perl5

install.perl:
	cd ${.OBJDIR}; INSTALL=${INSTALL} INSTALL_COPY=${INSTALL_COPY} \
	 STRIPFLAGS=${STRIPFLAGS} INSTALLFLAGS=-o NOLIBINSTALL=1 \
	 LD_LIBRARY_PATH=${.OBJDIR} exec ./perl installperl --destdir=${DESTDIR} -o STRIPFLAGS=${STRIPFLAGS}

test:
	-@if [ -e Makefile ]; then ${MAKE} test; fi

clean:
	-@if [ -e Makefile ]; then ${MAKE} realclean; fi

cleandir:
	-@if [ ${.CURDIR} != ${.OBJDIR} ]; then \
	    rm -rf *; \
	else \
	    test -e Makefile && ${MAKE} distclean; \
	    rm -f ${CLEANFILES}; \
	fi
	@cd ${.CURDIR} && ${MAKE} -f Makefile.bsd-wrapper1 cleandir

maninstall:
.ifdef NOMAN
	@echo NOMAN is set
.else
	@cd ${.CURDIR} && exec ${MAKE} -f Makefile.bsd-wrapper1 maninstall
.endif

.include <bsd.lib.mk>

# These have to come after the inclusion of <bsd.lib.mk>

# Need -fPIC, not -fpic on sparc
.if ($(TARGET_MACHINE_ARCH) == sparc)
PICFLAG=-fPIC
.endif

perl.lib:	${GENERATED} ${_LIBS}

install.lib:
	${INSTALL} ${INSTALL_COPY} -o ${LIBOWN} -g ${LIBGRP} -m 600 lib${LIB}.a \
	    ${DESTDIR}${LIBDIR}
.if (${INSTALL_COPY} != "-p")
	${RANLIB} -t ${DESTDIR}${LIBDIR}/lib${LIB}.a
.endif
	chmod ${LIBMODE} ${DESTDIR}${LIBDIR}/lib${LIB}.a
.if !defined(NOPROFILE)
	${INSTALL} ${INSTALL_COPY} -o ${LIBOWN} -g ${LIBGRP} -m 600 \
	    lib${LIB}_p.a ${DESTDIR}${LIBDIR}
.if (${INSTALL_COPY} != "-p")
	${RANLIB} -t ${DESTDIR}${LIBDIR}/lib${LIB}_p.a
.endif
	chmod ${LIBMODE} ${DESTDIR}${LIBDIR}/lib${LIB}_p.a
.endif
.if !defined(NOPIC) && (${MACHINE_ARCH} != "mips64") 
	${INSTALL} ${INSTALL_COPY} -o ${LIBOWN} -g ${LIBGRP} -m 600 \
	    lib${LIB}_pic.a ${DESTDIR}${LIBDIR}
.if (${INSTALL_COPY} != "-p")
	${RANLIB} -t ${DESTDIR}${LIBDIR}/lib${LIB}_pic.a
.endif
	chmod ${LIBMODE} ${DESTDIR}${LIBDIR}/lib${LIB}_pic.a
.endif
.if !defined(NOPIC) && defined(major) && defined(minor)
	${INSTALL} ${INSTALL_COPY} -o ${LIBOWN} -g ${LIBGRP} -m ${LIBMODE} \
	    lib${LIB}.so.${major}.${minor} ${DESTDIR}${LIBDIR}
.endif
.PHONY: perl.lib install.lib perl.build install.perl man.build mansrc.build