# This Makefile is for the B::C extension to perl.
#
# It was generated automatically by MakeMaker version
# 6.30 (Revision: Revision: 1.8 ) from the contents of
# Makefile.PL. Don't edit this file, edit Makefile.PL instead.
#
#       ANY CHANGES MADE HERE WILL BE LOST!
#
#   MakeMaker ARGV: (q[INSTALLDIRS=perl], q[PERL_CORE=1], q[LIBPERL_A=libperl.a])
#
#   MakeMaker Parameters:

#     NAME => q[B::C]
#     VERSION_FROM => q[../B/C.pm]

# --- MakeMaker post_initialize section:


# --- MakeMaker const_config section:

# These definitions are from config.sh (via ../../lib/Config.pm)

# They may have been overridden via Makefile.PL or on the command line
AR = ar
CC = cc
CCCDLFLAGS = -fpic
CCDLFLAGS =  
DLEXT = so
DLSRC = dl_dlopen.xs
LD = cc
LDDLFLAGS =  -L/usr/local/lib
LDFLAGS =  -L/usr/local/lib
LIBC = /usr/lib/libc.so.48.0
LIB_EXT = .a
OBJ_EXT = .o
OSNAME = fabbsd
OSVERS = 1.0
RANLIB = ranlib
SITELIBEXP = /usr/local/libdata/perl5/site_perl
SITEARCHEXP = /usr/local/libdata/perl5/site_perl/i386-fabbsd
SO = so
EXE_EXT = 
FULL_AR = /usr/bin/ar
VENDORARCHEXP = 
VENDORLIBEXP = 


# --- MakeMaker constants section:
AR_STATIC_ARGS = cr
DIRFILESEP = /
DFSEP = $(DIRFILESEP)
NAME = B::C
NAME_SYM = B_C
VERSION = 1.04_01
VERSION_MACRO = VERSION
VERSION_SYM = 1_04_01
DEFINE_VERSION = -D$(VERSION_MACRO)=\"$(VERSION)\"
XS_VERSION = 1.04_01
XS_VERSION_MACRO = XS_VERSION
XS_DEFINE_VERSION = -D$(XS_VERSION_MACRO)=\"$(XS_VERSION)\"
INST_ARCHLIB = ../../../lib
INST_SCRIPT = ../blib/script
INST_BIN = ../blib/bin
INST_LIB = ../../../lib
INST_MAN1DIR = ../blib/man1
INST_MAN3DIR = ../blib/man3
MAN1EXT = 1
MAN3EXT = 3p
INSTALLDIRS = site
DESTDIR = 
PREFIX = $(SITEPREFIX)
PERLPREFIX = /usr/local
SITEPREFIX = /usr/local
VENDORPREFIX = 
INSTALLPRIVLIB = /usr/libdata/perl5
DESTINSTALLPRIVLIB = $(DESTDIR)$(INSTALLPRIVLIB)
INSTALLSITELIB = /usr/local/libdata/perl5/site_perl
DESTINSTALLSITELIB = $(DESTDIR)$(INSTALLSITELIB)
INSTALLVENDORLIB = 
DESTINSTALLVENDORLIB = $(DESTDIR)$(INSTALLVENDORLIB)
INSTALLARCHLIB = /usr/libdata/perl5/i386-fabbsd/5.8.8
DESTINSTALLARCHLIB = $(DESTDIR)$(INSTALLARCHLIB)
INSTALLSITEARCH = /usr/local/libdata/perl5/site_perl/i386-fabbsd
DESTINSTALLSITEARCH = $(DESTDIR)$(INSTALLSITEARCH)
INSTALLVENDORARCH = 
DESTINSTALLVENDORARCH = $(DESTDIR)$(INSTALLVENDORARCH)
INSTALLBIN = /usr/local/bin
DESTINSTALLBIN = $(DESTDIR)$(INSTALLBIN)
INSTALLSITEBIN = /usr/local/bin
DESTINSTALLSITEBIN = $(DESTDIR)$(INSTALLSITEBIN)
INSTALLVENDORBIN = 
DESTINSTALLVENDORBIN = $(DESTDIR)$(INSTALLVENDORBIN)
INSTALLSCRIPT = /usr/local/bin
DESTINSTALLSCRIPT = $(DESTDIR)$(INSTALLSCRIPT)
INSTALLMAN1DIR = none
DESTINSTALLMAN1DIR = $(DESTDIR)$(INSTALLMAN1DIR)
INSTALLSITEMAN1DIR = /usr/local/man/man1
DESTINSTALLSITEMAN1DIR = $(DESTDIR)$(INSTALLSITEMAN1DIR)
INSTALLVENDORMAN1DIR = 
DESTINSTALLVENDORMAN1DIR = $(DESTDIR)$(INSTALLVENDORMAN1DIR)
INSTALLMAN3DIR = none
DESTINSTALLMAN3DIR = $(DESTDIR)$(INSTALLMAN3DIR)
INSTALLSITEMAN3DIR = /usr/local/man/man3p
DESTINSTALLSITEMAN3DIR = $(DESTDIR)$(INSTALLSITEMAN3DIR)
INSTALLVENDORMAN3DIR = 
DESTINSTALLVENDORMAN3DIR = $(DESTDIR)$(INSTALLVENDORMAN3DIR)
PERL_LIB = ../../../lib
PERL_ARCHLIB = ../../../lib
LIBPERL_A = libperl.a
FIRST_MAKEFILE = Makefile
MAKEFILE_OLD = Makefile.old
MAKE_APERL_FILE = Makefile.aperl
PERLMAINCC = $(CC)
PERL_SRC = ../../..
PERL_INC = ../../..
PERL = ../../../miniperl
FULLPERL = ../../../perl
ABSPERL = /usr/src/gnu/usr.bin/perl/ext/B/C/../../../miniperl
PERLRUN = $(PERL) "-I$(PERL_LIB)" "-I$(PERL_ARCHLIB)"
FULLPERLRUN = $(FULLPERL) "-I$(PERL_LIB)" "-I$(PERL_ARCHLIB)"
ABSPERLRUN = $(ABSPERL) "-I$(PERL_LIB)" "-I$(PERL_ARCHLIB)"
PERLRUNINST = $(PERLRUN) "-I$(INST_ARCHLIB)" "-I$(INST_LIB)"
FULLPERLRUNINST = $(FULLPERLRUN) "-I$(INST_ARCHLIB)" "-I$(INST_LIB)"
ABSPERLRUNINST = $(ABSPERLRUN) "-I$(INST_ARCHLIB)" "-I$(INST_LIB)"
PERL_CORE = 1
PERM_RW = 644
PERM_RWX = 755

MAKEMAKER   = ../../lib/ExtUtils/MakeMaker.pm
MM_VERSION  = 6.30
MM_REVISION = Revision: 1.8 

# FULLEXT = Pathname for extension directory (eg Foo/Bar/Oracle).
# BASEEXT = Basename part of FULLEXT. May be just equal FULLEXT. (eg Oracle)
# PARENT_NAME = NAME without BASEEXT and no trailing :: (eg Foo::Bar)
# DLBASE  = Basename part of dynamic library. May be just equal BASEEXT.
FULLEXT = B/C
BASEEXT = C
PARENT_NAME = B
DLBASE = $(BASEEXT)
VERSION_FROM = ../B/C.pm
OBJECT = $(BASEEXT)$(OBJ_EXT)
LDFROM = $(OBJECT)
LINKTYPE = dynamic
BOOTDEP = 

# Handy lists of source code files:
XS_FILES = C.xs
C_FILES  = C.c
O_FILES  = C.o
H_FILES  = 
MAN1PODS = 
MAN3PODS = 

# Where is the Config information that we are using/depend on
CONFIGDEP = $(PERL_ARCHLIB)$(DFSEP)Config.pm $(PERL_INC)$(DFSEP)config.h

# Where to build things
INST_LIBDIR      = $(INST_LIB)/B
INST_ARCHLIBDIR  = $(INST_ARCHLIB)/B

INST_AUTODIR     = $(INST_LIB)/auto/$(FULLEXT)
INST_ARCHAUTODIR = $(INST_ARCHLIB)/auto/$(FULLEXT)

INST_STATIC      = $(INST_ARCHAUTODIR)/$(BASEEXT)$(LIB_EXT)
INST_DYNAMIC     = $(INST_ARCHAUTODIR)/$(DLBASE).$(DLEXT)
INST_BOOT        = $(INST_ARCHAUTODIR)/$(BASEEXT).bs

# Extra linker info
EXPORT_LIST        = 
PERL_ARCHIVE       = 
PERL_ARCHIVE_AFTER = 


TO_INST_PM = 

PM_TO_BLIB = 


# --- MakeMaker platform_constants section:
MM_Unix_VERSION = 1.50
PERL_MALLOC_DEF = -DPERL_EXTMALLOC_DEF -Dmalloc=Perl_malloc -Dfree=Perl_mfree -Drealloc=Perl_realloc -Dcalloc=Perl_calloc


# --- MakeMaker tool_autosplit section:
# Usage: $(AUTOSPLITFILE) FileToSplit AutoDirToSplitInto
AUTOSPLITFILE = $(ABSPERLRUN)  -e 'use AutoSplit;  autosplit($$ARGV[0], $$ARGV[1], 0, 1, 1)'



# --- MakeMaker tool_xsubpp section:

XSUBPPDIR = ../../../lib/ExtUtils
XSUBPP = $(XSUBPPDIR)$(DFSEP)xsubpp
XSUBPPRUN = $(PERLRUN) $(XSUBPP)
XSPROTOARG = 
XSUBPPDEPS = ../../../lib/ExtUtils/typemap $(XSUBPP)
XSUBPPARGS = -typemap ../../../lib/ExtUtils/typemap
XSUBPP_EXTRA_ARGS = 


# --- MakeMaker tools_other section:
SHELL = /bin/sh
CHMOD = chmod
CP = cp
MV = mv
NOOP = $(SHELL) -c true
NOECHO = @
RM_F = rm -f
RM_RF = rm -rf
TEST_F = test -f
TOUCH = touch
UMASK_NULL = umask 0
DEV_NULL = > /dev/null 2>&1
MKPATH = $(ABSPERLRUN) "-MExtUtils::Command" -e mkpath
EQUALIZE_TIMESTAMP = $(ABSPERLRUN) "-MExtUtils::Command" -e eqtime
ECHO = echo
ECHO_N = echo -n
UNINST = 0
VERBINST = 0
MOD_INSTALL = $(ABSPERLRUN) -MExtUtils::Install -e 'install({@ARGV}, '\''$(VERBINST)'\'', 0, '\''$(UNINST)'\'');'
DOC_INSTALL = $(ABSPERLRUN) "-MExtUtils::Command::MM" -e perllocal_install
UNINSTALL = $(ABSPERLRUN) "-MExtUtils::Command::MM" -e uninstall
WARN_IF_OLD_PACKLIST = $(ABSPERLRUN) "-MExtUtils::Command::MM" -e warn_if_old_packlist
MACROSTART = 
MACROEND = 
USEMAKEFILE = -f
FIXIN = $(PERLRUN) "-MExtUtils::MY" -e "MY->fixin(shift)"


# --- MakeMaker makemakerdflt section:
makemakerdflt: all
	$(NOECHO) $(NOOP)


# --- MakeMaker dist section skipped.

# --- MakeMaker macro section:


# --- MakeMaker depend section:


# --- MakeMaker cflags section:

CCFLAGS = -fno-strict-aliasing -fno-delete-null-pointer-checks -pipe -I/usr/local/include
OPTIMIZE = -O
PERLTYPE = 
MPOLLUTE = 


# --- MakeMaker const_loadlibs section:

# B::C might depend on some other libraries:
# See ExtUtils::Liblist for details
#


# --- MakeMaker const_cccmd section:
CCCMD = $(CC) -c $(PASTHRU_INC) $(INC) \
	$(CCFLAGS) $(OPTIMIZE) $(COPTS) \
	$(PERLTYPE) $(MPOLLUTE) $(DEFINE_VERSION) \
	$(XS_DEFINE_VERSION)

# --- MakeMaker post_constants section:


# --- MakeMaker pasthru section:

PASTHRU = LIBPERL_A="$(LIBPERL_A)"\
	LINKTYPE="$(LINKTYPE)"\
	OPTIMIZE="$(OPTIMIZE)"\
	PREFIX="$(PREFIX)"


# --- MakeMaker special_targets section:
.SUFFIXES : .xs .c .C .cpp .i .s .cxx .cc $(OBJ_EXT)

.PHONY: all config static dynamic test linkext manifest blibdirs clean realclean disttest distdir



# --- MakeMaker c_o section:

.c.i:
	cc -E -c $(PASTHRU_INC) $(INC) \
	$(CCFLAGS) $(OPTIMIZE) $(COPTS) \
	$(PERLTYPE) $(MPOLLUTE) $(DEFINE_VERSION) \
	$(XS_DEFINE_VERSION) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.c > $*.i

.c.s:
	$(CCCMD) -S $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.c

.c$(OBJ_EXT):
	$(CCCMD) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.c

.C$(OBJ_EXT):
	$(CCCMD) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.C

.cpp$(OBJ_EXT):
	$(CCCMD) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.cpp

.cxx$(OBJ_EXT):
	$(CCCMD) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.cxx

.cc$(OBJ_EXT):
	$(CCCMD) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.cc


# --- MakeMaker xs_c section:

.xs.c:
	$(XSUBPPRUN) $(XSPROTOARG) $(XSUBPPARGS) $(XSUBPP_EXTRA_ARGS) $*.xs > $*.xsc && $(MV) $*.xsc $*.c


# --- MakeMaker xs_o section:

.xs$(OBJ_EXT):
	$(XSUBPPRUN) $(XSPROTOARG) $(XSUBPPARGS) $*.xs > $*.xsc && $(MV) $*.xsc $*.c
	$(CCCMD) $(CCCDLFLAGS) "-I$(PERL_INC)" $(PASTHRU_DEFINE) $(DEFINE) $*.c


# --- MakeMaker top_targets section:
all :: pure_all manifypods
	$(NOECHO) $(NOOP)


pure_all :: config pm_to_blib subdirs linkext
	$(NOECHO) $(NOOP)

subdirs ::
	$(NOECHO) $(NOOP)

config :: $(FIRST_MAKEFILE) blibdirs
	$(NOECHO) $(NOOP)

help :
	perldoc ExtUtils::MakeMaker


# --- MakeMaker blibdirs section:
blibdirs : $(INST_LIBDIR)$(DFSEP).exists $(INST_ARCHLIB)$(DFSEP).exists $(INST_AUTODIR)$(DFSEP).exists $(INST_ARCHAUTODIR)$(DFSEP).exists $(INST_BIN)$(DFSEP).exists $(INST_SCRIPT)$(DFSEP).exists $(INST_MAN1DIR)$(DFSEP).exists $(INST_MAN3DIR)$(DFSEP).exists
	$(NOECHO) $(NOOP)

# Backwards compat with 6.18 through 6.25
blibdirs.ts : blibdirs
	$(NOECHO) $(NOOP)

$(INST_LIBDIR)$(DFSEP).exists :: Makefile.PL
	$(NOECHO) $(MKPATH) $(INST_LIBDIR)
	$(NOECHO) $(CHMOD) 755 $(INST_LIBDIR)
	$(NOECHO) $(TOUCH) $(INST_LIBDIR)$(DFSEP).exists

$(INST_ARCHLIB)$(DFSEP).exists :: Makefile.PL
	$(NOECHO) $(MKPATH) $(INST_ARCHLIB)
	$(NOECHO) $(CHMOD) 755 $(INST_ARCHLIB)
	$(NOECHO) $(TOUCH) $(INST_ARCHLIB)$(DFSEP).exists

$(INST_AUTODIR)$(DFSEP).exists :: Makefile.PL
	$(NOECHO) $(MKPATH) $(INST_AUTODIR)
	$(NOECHO) $(CHMOD) 755 $(INST_AUTODIR)
	$(NOECHO) $(TOUCH) $(INST_AUTODIR)$(DFSEP).exists

$(INST_ARCHAUTODIR)$(DFSEP).exists :: Makefile.PL
	$(NOECHO) $(MKPATH) $(INST_ARCHAUTODIR)
	$(NOECHO) $(CHMOD) 755 $(INST_ARCHAUTODIR)
	$(NOECHO) $(TOUCH) $(INST_ARCHAUTODIR)$(DFSEP).exists

$(INST_BIN)$(DFSEP).exists :: Makefile.PL
	$(NOECHO) $(MKPATH) $(INST_BIN)
	$(NOECHO) $(CHMOD) 755 $(INST_BIN)
	$(NOECHO) $(TOUCH) $(INST_BIN)$(DFSEP).exists

$(INST_SCRIPT)$(DFSEP).exists :: Makefile.PL
	$(NOECHO) $(MKPATH) $(INST_SCRIPT)
	$(NOECHO) $(CHMOD) 755 $(INST_SCRIPT)
	$(NOECHO) $(TOUCH) $(INST_SCRIPT)$(DFSEP).exists

$(INST_MAN1DIR)$(DFSEP).exists :: Makefile.PL
	$(NOECHO) $(MKPATH) $(INST_MAN1DIR)
	$(NOECHO) $(CHMOD) 755 $(INST_MAN1DIR)
	$(NOECHO) $(TOUCH) $(INST_MAN1DIR)$(DFSEP).exists

$(INST_MAN3DIR)$(DFSEP).exists :: Makefile.PL
	$(NOECHO) $(MKPATH) $(INST_MAN3DIR)
	$(NOECHO) $(CHMOD) 755 $(INST_MAN3DIR)
	$(NOECHO) $(TOUCH) $(INST_MAN3DIR)$(DFSEP).exists



# --- MakeMaker linkext section:

linkext :: $(LINKTYPE)
	$(NOECHO) $(NOOP)


# --- MakeMaker dlsyms section:


# --- MakeMaker dynamic section:

dynamic :: $(FIRST_MAKEFILE) $(INST_DYNAMIC) $(INST_BOOT)
	$(NOECHO) $(NOOP)


# --- MakeMaker dynamic_bs section:
BOOTSTRAP = $(BASEEXT).bs

# As Mkbootstrap might not write a file (if none is required)
# we use touch to prevent make continually trying to remake it.
# The DynaLoader only reads a non-empty file.
$(BOOTSTRAP) : $(FIRST_MAKEFILE) $(BOOTDEP) $(INST_ARCHAUTODIR)$(DFSEP).exists
	$(NOECHO) $(ECHO) "Running Mkbootstrap for $(NAME) ($(BSLOADLIBS))"
	$(NOECHO) $(PERLRUN) \
		"-MExtUtils::Mkbootstrap" \
		-e "Mkbootstrap('$(BASEEXT)','$(BSLOADLIBS)');"
	$(NOECHO) $(TOUCH) $@
	$(CHMOD) $(PERM_RW) $@

$(INST_BOOT) : $(BOOTSTRAP) $(INST_ARCHAUTODIR)$(DFSEP).exists
	$(NOECHO) $(RM_RF) $@
	- $(CP) $(BOOTSTRAP) $@
	$(CHMOD) $(PERM_RW) $@


# --- MakeMaker dynamic_lib section:

# This section creates the dynamically loadable $(INST_DYNAMIC)
# from $(OBJECT) and possibly $(MYEXTLIB).
ARMAYBE = :
OTHERLDFLAGS = 
INST_DYNAMIC_DEP = 
INST_DYNAMIC_FIX = 

$(INST_DYNAMIC): $(OBJECT) $(MYEXTLIB) $(BOOTSTRAP) $(INST_ARCHAUTODIR)$(DFSEP).exists $(EXPORT_LIST) $(PERL_ARCHIVE) $(PERL_ARCHIVE_AFTER) $(INST_DYNAMIC_DEP)
	$(RM_F) $@
	$(LD)  $(LDDLFLAGS) $(LDFROM) $(OTHERLDFLAGS) -o $@ $(MYEXTLIB)	\
	  $(PERL_ARCHIVE) $(LDLOADLIBS) $(PERL_ARCHIVE_AFTER) $(EXPORT_LIST)	\
	  $(INST_DYNAMIC_FIX)
	$(CHMOD) $(PERM_RWX) $@


# --- MakeMaker static section:

## $(INST_PM) has been moved to the all: target.
## It remains here for awhile to allow for old usage: "make static"
static :: $(FIRST_MAKEFILE) $(INST_STATIC)
	$(NOECHO) $(NOOP)


# --- MakeMaker static_lib section:

$(INST_STATIC) : $(OBJECT) $(MYEXTLIB) $(INST_ARCHAUTODIR)$(DFSEP).exists
	$(RM_RF) $@
	$(FULL_AR) $(AR_STATIC_ARGS) $@ $(OBJECT) && $(RANLIB) $@
	$(CHMOD) $(PERM_RWX) $@
	$(NOECHO) $(ECHO) "$(EXTRALIBS)" > $(INST_ARCHAUTODIR)/extralibs.ld


# --- MakeMaker manifypods section:

POD2MAN_EXE = $(PERLRUN) "-MExtUtils::Command::MM" -e pod2man "--"
POD2MAN = $(POD2MAN_EXE)


manifypods : pure_all 
	$(NOECHO) $(NOOP)




# --- MakeMaker processPL section:


# --- MakeMaker installbin section:


# --- MakeMaker subdirs section:

# none

# --- MakeMaker clean_subdirs section:
clean_subdirs :
	$(NOECHO) $(NOOP)


# --- MakeMaker clean section:

# Delete temporary files but do not touch installed files. We don't delete
# the Makefile here so a later make realclean still has a makefile to use.

clean :: clean_subdirs
	- $(RM_F) \
	  *$(LIB_EXT) core \
	  core.[0-9] $(INST_ARCHAUTODIR)/extralibs.all \
	  core.[0-9][0-9] $(BASEEXT).bso \
	  pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \
	  $(BASEEXT).x $(BOOTSTRAP) \
	  C.c perl$(EXE_EXT) \
	  tmon.out *$(OBJ_EXT) \
	  pm_to_blib $(INST_ARCHAUTODIR)/extralibs.ld \
	  blibdirs.ts core.[0-9][0-9][0-9][0-9][0-9] \
	  *perl.core core.*perl.*.? \
	  $(MAKE_APERL_FILE) perl \
	  $(BASEEXT).def core.[0-9][0-9][0-9] \
	  mon.out lib$(BASEEXT).def \
	  perlmain.c perl.exe \
	  so_locations $(BASEEXT).exp 
	- $(RM_RF) \
	  blib 
	- $(MV) $(FIRST_MAKEFILE) $(MAKEFILE_OLD) $(DEV_NULL)


# --- MakeMaker realclean_subdirs section:
realclean_subdirs :
	$(NOECHO) $(NOOP)


# --- MakeMaker realclean section:
# Delete temporary files (via clean) and also delete dist files
realclean purge ::  clean realclean_subdirs
	- $(RM_F) \
	  $(OBJECT) $(MAKEFILE_OLD) \
	  $(FIRST_MAKEFILE) 
	- $(RM_RF) \
	  $(INST_ARCHAUTODIR) $(INST_AUTODIR) \
	  $(DISTVNAME) 


# --- MakeMaker metafile section:
metafile : create_distdir
	$(NOECHO) $(ECHO) Generating META.yml
	$(NOECHO) $(ECHO) '# http://module-build.sourceforge.net/META-spec.html' > META_new.yml
	$(NOECHO) $(ECHO) '#XXXXXXX This is a prototype!!!  It will change in the future!!! XXXXX#' >> META_new.yml
	$(NOECHO) $(ECHO) 'name:         B-C' >> META_new.yml
	$(NOECHO) $(ECHO) 'version:      1.04_01' >> META_new.yml
	$(NOECHO) $(ECHO) 'version_from: ../B/C.pm' >> META_new.yml
	$(NOECHO) $(ECHO) 'installdirs:  site' >> META_new.yml
	$(NOECHO) $(ECHO) 'requires:' >> META_new.yml
	$(NOECHO) $(ECHO) '' >> META_new.yml
	$(NOECHO) $(ECHO) 'distribution_type: module' >> META_new.yml
	$(NOECHO) $(ECHO) 'generated_by: ExtUtils::MakeMaker version 6.30' >> META_new.yml
	-$(NOECHO) $(MV) META_new.yml $(DISTVNAME)/META.yml


# --- MakeMaker signature section:
signature :
	cpansign -s


# --- MakeMaker dist_basics section skipped.

# --- MakeMaker dist_core section skipped.

# --- MakeMaker distdir section skipped.

# --- MakeMaker dist_test section skipped.

# --- MakeMaker dist_ci section skipped.

# --- MakeMaker distmeta section:
distmeta : create_distdir metafile
	$(NOECHO) cd $(DISTVNAME) && $(ABSPERLRUN) -MExtUtils::Manifest=maniadd -e 'eval { maniadd({q{META.yml} => q{Module meta-data (added by MakeMaker)}}) } ' \
	  -e '    or print "Could not add META.yml to MANIFEST: $${'\''@'\''}\n"'



# --- MakeMaker distsignature section:
distsignature : create_distdir
	$(NOECHO) cd $(DISTVNAME) && $(ABSPERLRUN) -MExtUtils::Manifest=maniadd -e 'eval { maniadd({q{SIGNATURE} => q{Public-key signature (added by MakeMaker)}}) } ' \
	  -e '    or print "Could not add SIGNATURE to MANIFEST: $${'\''@'\''}\n"'
	$(NOECHO) cd $(DISTVNAME) && $(TOUCH) SIGNATURE
	cd $(DISTVNAME) && cpansign -s



# --- MakeMaker install section skipped.

# --- MakeMaker force section:
# Phony target to force checking subdirectories.
FORCE:
	$(NOECHO) $(NOOP)


# --- MakeMaker perldepend section:
# Check for unpropogated config.sh changes. Should never happen.
# We do NOT just update config.h because that is not sufficient.
# An out of date config.h is not fatal but complains loudly!
$(PERL_INC)/config.h: $(PERL_SRC)/config.sh
	-$(NOECHO) $(ECHO) "Warning: $(PERL_INC)/config.h out of date with $(PERL_SRC)/config.sh"; false

$(PERL_ARCHLIB)/Config.pm: $(PERL_SRC)/config.sh
	$(NOECHO) $(ECHO) "Warning: $(PERL_ARCHLIB)/Config.pm may be out of date with $(PERL_SRC)/config.sh"
	cd $(PERL_SRC) && $(MAKE) lib/Config.pm


PERL_HDRS = \
	$(PERL_INC)/EXTERN.h		\
	$(PERL_INC)/INTERN.h		\
	$(PERL_INC)/XSUB.h		\
	$(PERL_INC)/av.h		\
	$(PERL_INC)/cc_runtime.h	\
	$(PERL_INC)/config.h		\
	$(PERL_INC)/cop.h		\
	$(PERL_INC)/cv.h		\
	$(PERL_INC)/dosish.h		\
	$(PERL_INC)/embed.h		\
	$(PERL_INC)/embedvar.h		\
	$(PERL_INC)/fakethr.h		\
	$(PERL_INC)/form.h		\
	$(PERL_INC)/gv.h		\
	$(PERL_INC)/handy.h		\
	$(PERL_INC)/hv.h		\
	$(PERL_INC)/intrpvar.h		\
	$(PERL_INC)/iperlsys.h		\
	$(PERL_INC)/keywords.h		\
	$(PERL_INC)/mg.h		\
	$(PERL_INC)/nostdio.h		\
	$(PERL_INC)/op.h		\
	$(PERL_INC)/opcode.h		\
	$(PERL_INC)/patchlevel.h	\
	$(PERL_INC)/perl.h		\
	$(PERL_INC)/perlio.h		\
	$(PERL_INC)/perlsdio.h		\
	$(PERL_INC)/perlsfio.h		\
	$(PERL_INC)/perlvars.h		\
	$(PERL_INC)/perly.h		\
	$(PERL_INC)/pp.h		\
	$(PERL_INC)/pp_proto.h		\
	$(PERL_INC)/proto.h		\
	$(PERL_INC)/regcomp.h		\
	$(PERL_INC)/regexp.h		\
	$(PERL_INC)/regnodes.h		\
	$(PERL_INC)/scope.h		\
	$(PERL_INC)/sv.h		\
	$(PERL_INC)/thrdvar.h		\
	$(PERL_INC)/thread.h		\
	$(PERL_INC)/unixish.h		\
	$(PERL_INC)/util.h

$(OBJECT) : $(PERL_HDRS)

C.c : $(XSUBPPDEPS)


# --- MakeMaker makefile section:

$(OBJECT) : $(FIRST_MAKEFILE)

# We take a very conservative approach here, but it's worth it.
# We move Makefile to Makefile.old here to avoid gnu make looping.
$(FIRST_MAKEFILE) : Makefile.PL $(CONFIGDEP)
	$(NOECHO) $(ECHO) "Makefile out-of-date with respect to $?"
	$(NOECHO) $(ECHO) "Cleaning current config before rebuilding Makefile..."
	-$(NOECHO) $(RM_F) $(MAKEFILE_OLD)
	-$(NOECHO) $(MV)   $(FIRST_MAKEFILE) $(MAKEFILE_OLD)
	- $(MAKE) $(USEMAKEFILE) $(MAKEFILE_OLD) clean $(DEV_NULL)
	$(PERLRUN) Makefile.PL "INSTALLDIRS=perl" "PERL_CORE=1" "LIBPERL_A=libperl.a"
	$(NOECHO) $(ECHO) "==> Your Makefile has been rebuilt. <=="
	$(NOECHO) $(ECHO) "==> Please rerun the $(MAKE) command.  <=="
	false



# --- MakeMaker staticmake section:

# --- MakeMaker makeaperl section ---
MAP_TARGET    = ../perl
FULLPERL      = ../../../perl


# --- MakeMaker test section:

TEST_VERBOSE=0
TEST_TYPE=test_$(LINKTYPE)
TEST_FILE = test.pl
TEST_FILES = 
TESTDB_SW = -d

testdb :: testdb_$(LINKTYPE)

test :: $(TEST_TYPE)
	$(NOECHO) $(ECHO) 'No tests defined for $(NAME) extension.'

test_dynamic :: pure_all

testdb_dynamic :: pure_all
	PERL_DL_NONLAZY=1 $(FULLPERLRUN) $(TESTDB_SW) "-I$(INST_LIB)" "-I$(INST_ARCHLIB)" $(TEST_FILE)

test_ : test_dynamic

test_static :: pure_all $(MAP_TARGET)

testdb_static :: pure_all $(MAP_TARGET)
	PERL_DL_NONLAZY=1 ./$(MAP_TARGET) $(TESTDB_SW) "-I$(INST_LIB)" "-I$(INST_ARCHLIB)" $(TEST_FILE)



# --- MakeMaker ppd section:
# Creates a PPD (Perl Package Description) for a binary distribution.
ppd:
	$(NOECHO) $(ECHO) '<SOFTPKG NAME="$(DISTNAME)" VERSION="1,04_01,0,0">' > $(DISTNAME).ppd
	$(NOECHO) $(ECHO) '    <TITLE>$(DISTNAME)</TITLE>' >> $(DISTNAME).ppd
	$(NOECHO) $(ECHO) '    <ABSTRACT></ABSTRACT>' >> $(DISTNAME).ppd
	$(NOECHO) $(ECHO) '    <AUTHOR></AUTHOR>' >> $(DISTNAME).ppd
	$(NOECHO) $(ECHO) '    <IMPLEMENTATION>' >> $(DISTNAME).ppd
	$(NOECHO) $(ECHO) '        <OS NAME="$(OSNAME)" />' >> $(DISTNAME).ppd
	$(NOECHO) $(ECHO) '        <ARCHITECTURE NAME="i386-fabbsd" />' >> $(DISTNAME).ppd
	$(NOECHO) $(ECHO) '        <CODEBASE HREF="" />' >> $(DISTNAME).ppd
	$(NOECHO) $(ECHO) '    </IMPLEMENTATION>' >> $(DISTNAME).ppd
	$(NOECHO) $(ECHO) '</SOFTPKG>' >> $(DISTNAME).ppd


# --- MakeMaker pm_to_blib section:

pm_to_blib : $(TO_INST_PM)
	$(NOECHO) $(TOUCH) pm_to_blib


# --- MakeMaker selfdocument section:


# --- MakeMaker postamble section:


# End.