.\" $OpenBSD: ural.4,v 1.7 2008/07/29 16:44:19 jmc Exp $ .\" .\" Copyright (c) 2005-2007 .\" Damien Bergamini .\" .\" Permission to use, copy, modify, and distribute this software for any .\" purpose with or without fee is hereby granted, provided that the above .\" copyright notice and this permission notice appear in all copies. .\" .\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES .\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF .\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR .\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES .\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. .\" .Dd $Mdocdate: July 29 2008 $ .Os .Dt URAL 4 .Sh NAME .Nm ural .Nd Ralink Technology USB IEEE 802.11b/g wireless network device .Sh SYNOPSIS .Cd "ural* at uhub? port ?" .Sh DESCRIPTION The .Nm driver supports USB 2.0 wireless adapters based on the Ralink RT2500USB chipset. .Pp The RT2500USB chipset is the first generation of 802.11b/g adapters from Ralink. It consists of two integrated chips, an RT2570 MAC/BBP and an RT2526 radio transceiver. .Pp These are the modes the .Nm driver can operate in: .Bl -tag -width "IBSS-masterXX" .It BSS mode Also known as .Em infrastructure mode, this is used when associating with an access point, through which all traffic passes. This mode is the default. .It IBSS mode Also known as .Em IEEE ad-hoc mode or .Em peer-to-peer mode. This is the standardized method of operating without an access point. Stations associate with a service set. However, actual connections between stations are peer-to-peer. .It Host AP In this mode the driver acts as an access point (base station) for other cards. .It monitor mode In this mode the driver is able to receive packets without associating with an access point. This disables the internal receive filter and enables the card to capture packets from networks which it wouldn't normally have access to, or to scan for access points. .El .Pp The .Nm driver can be configured to use Wireless Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA-PSK and WPA2-PSK). WPA is the de facto encryption standard for wireless networks. It is strongly recommended that WEP not be used as the sole mechanism to secure wireless communication, due to serious weaknesses in it. The .Nm driver relies on the software 802.11 stack for both encryption and decryption of data frames. .Pp The transmit speed is user-selectable or can be adapted automatically by the driver depending on the number of hardware transmission retries. .Pp The .Nm driver can be configured at runtime with .Xr ifconfig 8 or on boot with .Xr hostname.if 5 . .Sh HARDWARE The following adapters should work: .Pp .Bl -tag -width Ds -offset indent -compact .It AMIT WL532U .It ASUS WL-167g v1 .It Belkin F5D7050 v2000 .It Buffalo WLI-U2-KG54 .It Buffalo WLI-U2-KG54-AI .It Buffalo WLI-U2-KG54-YB .It CNet CWD-854 .It Compex WLU54G 2A1100 .It Conceptronic C54RU .It D-Link DWL-G122 (b1) .It Dynalink WLG25USB .It E-Tech WGUS02 .It Eminent EM3035 .It Gigabyte GN-WBKG .It Hercules HWGUSB2-54 .It KCORP LifeStyle KLS-685 .It Linksys HU200-TS .It Linksys WUSB54G v4 .It Linksys WUSB54GP v4 .It MSI MS-6861 .It MSI MS-6865 .It MSI MS-6869 .It Nintendo Wi-Fi USB Connector .It Nova Tech NV-902W .It OvisLink Evo-W54USB .It SerComm UB801R .It SparkLAN WL-685R .It Sphairon UB801R .It Surecom EP-9001-g rev 3A .It Sweex LC100060 .It Tonze UW-6200C .It Zaapa ZNWUSB-54 .It Zinwell ZPlus-G250 .It Zinwell ZWX-G261 .It Zonet ZEW2500P .El .Sh EXAMPLES The following .Xr hostname.if 5 example configures ural0 to join whatever network is available on boot, using WEP key .Dq 0x1deadbeef1 , channel 11, obtaining an IP address using DHCP: .Bd -literal -offset indent dhcp NONE NONE NONE nwkey 0x1deadbeef1 chan 11 .Ed .Pp The following .Xr hostname.if 5 example creates a host-based access point on boot: .Bd -literal -offset indent inet 192.168.1.1 255.255.255.0 NONE media autoselect \e mediaopt hostap nwid my_net chan 11 .Ed .Pp Configure ural0 to join network .Dq my_net using WPA-PSK with passphrase .Dq my_passphrase : .Bd -literal -offset indent # ifconfig ural0 nwid my_net wpa wpapsk \e $(wpa-psk my_net my_passphrase) .Ed .Pp Return ural0 to its default settings: .Bd -literal -offset indent # ifconfig ural0 -bssid -chan media autoselect \e nwid "" -nwkey -wpa -wpapsk .Ed .Pp Join an existing BSS network, .Dq my_net : .Bd -literal -offset indent # ifconfig ural0 192.168.1.1 netmask 0xffffff00 nwid my_net .Ed .Sh DIAGNOSTICS .Bl -diag .It "ural%d: device timeout" A frame dispatched to the hardware for transmission did not complete in time. The driver will reset the hardware. This should not happen. .El .Sh SEE ALSO .Xr arp 4 , .Xr ifmedia 4 , .Xr intro 4 , .Xr netintro 4 , .Xr usb 4 , .Xr hostname.if 5 , .Xr hostapd 8 , .Xr ifconfig 8 , .Xr wpa-psk 8 .Pp Ralink Technology: .Pa http://www.ralinktech.com/ .Sh HISTORY The .Nm driver first appeared in .Ox 3.7 . .Sh AUTHORS The .Nm driver was written by .An Damien Bergamini Aq damien@openbsd.org . .Sh CAVEATS The .Nm driver supports automatic control of the transmit speed in BSS mode only. Therefore the use of an .Nm adapter in Host AP mode is discouraged.