/*	$OpenBSD: stp_sbus.c,v 1.7 2008/06/26 05:42:13 ray Exp $	*/
/*	$NetBSD: stp4020.c,v 1.23 2002/06/01 23:51:03 lukem Exp $	*/

/*-
 * Copyright (c) 1998 The NetBSD Foundation, Inc.
 * All rights reserved.
 *
 * This code is derived from software contributed to The NetBSD Foundation
 * by Paul Kranenburg.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

/*
 * STP4020: SBus/PCMCIA bridge supporting one Type-3 PCMCIA card, or up to
 * two Type-1 and Type-2 PCMCIA cards..
 */

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/errno.h>
#include <sys/malloc.h>
#include <sys/extent.h>
#include <sys/proc.h>
#include <sys/kernel.h>
#include <sys/kthread.h>
#include <sys/device.h>

#include <dev/pcmcia/pcmciareg.h>
#include <dev/pcmcia/pcmciavar.h>
#include <dev/pcmcia/pcmciachip.h>

#include <machine/bus.h>
#include <sparc/dev/sbusvar.h>

#include <dev/sbus/stp4020reg.h>
#include <dev/sbus/stp4020var.h>

struct stp4020_sbus_softc {
	struct stp4020_softc stp;
	struct rom_reg	sc_reg;
	struct rom_reg	sc_reg_le;  /* rev. copy for pcmcia bus_space access */
	struct intrhand	sc_ih[2];
};

int	stpmatch(struct device *, void *, void *);
void	stpattach(struct device *, struct device *, void *);

struct cfattach stp_sbus_ca = {
	sizeof(struct stp4020_sbus_softc), stpmatch, stpattach
};

int
stpmatch(parent, match, aux)
	struct device *parent;
	void *match;
	void *aux;
{
	struct confargs *ca = aux;

	return (strcmp("SUNW,pcmcia", ca->ca_ra.ra_name) == 0);
}

/*
 * Attach all the sub-devices we can find
 */
void
stpattach(parent, self, aux)
	struct device *parent, *self;
	void *aux;
{
	struct confargs *ca = aux;
	struct stp4020_sbus_softc *ssc = (void *)self;
	struct stp4020_softc *sc = (void *)self;
	int node;
	int i;
	bus_space_handle_t bh;

	node = ca->ca_ra.ra_node;

	/* Transfer bus tags */
	ssc->sc_reg = ca->ca_ra.ra_reg[0];
	ssc->sc_reg_le = ca->ca_ra.ra_reg[0];
	SET_TAG_LITTLE_ENDIAN(&ssc->sc_reg_le);
	sc->sc_bustag = &ssc->sc_reg;

	/* Set up per-socket static initialization */
	sc->sc_socks[0].sc = sc->sc_socks[1].sc = sc;
	sc->sc_socks[0].tag = sc->sc_socks[1].tag = sc->sc_bustag;

	if (ca->ca_ra.ra_nreg < 8) {
		printf(": only %d register sets\n", ca->ca_ra.ra_nreg);
		return;
	}

	if (ca->ca_ra.ra_nintr != 2) {
		printf(": expect 2 interrupt SBus levels; got %d\n",
		    ca->ca_ra.ra_nintr);
		return;
	}

#define STP4020_BANK_PROM	0
#define STP4020_BANK_CTRL	4
	for (i = 0; i < 8; i++) {

		/*
		 * STP4020 Register address map:
		 *	bank  0:   Forth PROM
		 *	banks 1-3: socket 0, windows 0-2
		 *	bank  4:   control registers
		 *	banks 5-7: socket 1, windows 0-2
		 */

		if (i == STP4020_BANK_PROM)
			/* Skip the PROM */
			continue;

		if (bus_space_map(&ca->ca_ra.ra_reg[i], 0,
		    ca->ca_ra.ra_reg[i].rr_len, 0, &bh) != 0) {
			printf(": attach: cannot map registers\n");
			return;
		}

		if (i == STP4020_BANK_CTRL) {
			/*
			 * Copy tag and handle to both socket structures
			 * for easy access in control/status IO functions.
			 */
			sc->sc_socks[0].regs = sc->sc_socks[1].regs = bh;
		} else if (i < STP4020_BANK_CTRL) {
			/* banks 1-3 */
			sc->sc_socks[0].windows[i-1].winaddr = bh;
			sc->sc_socks[0].wintag = &ssc->sc_reg_le;
		} else {
			/* banks 5-7 */
			sc->sc_socks[1].windows[i-5].winaddr = bh;
			sc->sc_socks[1].wintag = &ssc->sc_reg_le;
		}
	}

	/*
	 * We get to use two SBus interrupt levels.
	 * The higher level we use for status change interrupts;
	 * the lower level for PC card I/O.
	 */
	ssc->sc_ih[1].ih_fun = stp4020_statintr;
	ssc->sc_ih[1].ih_arg = sc;
	intr_establish(ca->ca_ra.ra_intr[1].int_pri,
	    &ssc->sc_ih[1], -1, self->dv_xname);
	printf(" pri %d", ca->ca_ra.ra_intr[1].int_pri);

	ssc->sc_ih[0].ih_fun = stp4020_iointr;
	ssc->sc_ih[0].ih_arg = sc;
	intr_establish(ca->ca_ra.ra_intr[0].int_pri,
	    &ssc->sc_ih[0], -1, self->dv_xname);
	printf(" and %d", ca->ca_ra.ra_intr[0].int_pri);

	stpattach_common(sc, ((struct sbus_softc *)parent)->sc_clockfreq);
}